信德迈科技（北京）有限公司

Parker派克 PDP系列接头 测试端口和诊断设备快速接头PDP361

 PDP  Series Nipples (diagnostic test port connectors) 6,000 psi, connect with PDP Series Couplers. These push to connect quick couplings provide easy connection for mechanical gauges or specialized diagnostic equipment including SensoControl meters and accessories. PDP Couplers allow test instruments, gauges, transducers, and flow sensors to be quickly and easily connected to system test points under full operating pressures up to 6000 psi.
PDP couplers and nipples push to connect, and then the coupler base is manually turned to open the nipple valve and complete the connection. When fully connected, the coupler base blocks the retracted sleeve to prevent accidental disconnects. PDP Nipples can be permanently mounted on equipment at critical test point locations, at threaded test ports, in rigid tubing or in hose assemblies. Couplers and nipples are available in 1/8"" size with a rated pressure of 6,000 psi.
Technical Characteristics: 
• Size: 1/8""
• Material: High tensile steel
• Port Ends: Male NPTF, Male UNF, Triple-Loc, Seal-Loc
• Seal Options: Nitrile, Ethylene Propylene, Fluorcarbon, Neoprene
Markets:
• Industrial 
• Construction
• Molding
• Testing
• Maintenance and Repair, MRO
Features/Benefits:
•  Steel nipples are machined from high tensile strength material to withstand continuous operating pressures up to 6000 psi 
• Nipple has a durable ball valve
• End fitting configurations include Triple-Lok and Seal-Lok options   
• Compatible with Parker's SensoControl diagnostic equipment
• Suitable for use with hydraulic or pneumatic systems
Applications: 
• Mobile equipment
• Cooling systems
• Industrial hydraulic systems
• Fluid or air system maintenance and troubleshooting
• System performance optimization
• System validation

PDP系列接头（诊断测试端口连接器）为6,000 psi，与PDP系列耦合器连接。这些推动连接的快速接头可轻松连接机械仪表或专用诊断设备，包括SensoControl仪表和附件。PDP耦合器使测试仪器，仪表，传感器和流量传感器能够在高达6000 psi的全操作压力下快速轻松地连接至系统测试点。
按下PDP接和母头进行连接，然后手动转动接头底座以打开奶嘴阀并完成连接。完全连接后，连接器基座会挡住缩回的套筒，以防止意外断开。PDP接头可以永久安装在设备上的关键测试点位置，螺纹测试端口，硬管或软管组件中。耦合器和奶嘴尺寸为1/8“”，额定压力为6,000 psi。
技术特性：
•尺寸：1/8“” 
•材质：高强度钢
•端口端：外螺纹NPTF，外螺纹UNF，三重定位，密封定位
•密封选项：腈，乙烯丙烯，碳氟化合物，氯丁橡胶
市场：
•工业
•建筑
•成型
•测试
•维护和维修，MRO
功能/优点：
•钢接头由高抗拉强度材料加工而成，可承受高达6000 psi的连续工作压力
•接头具有耐用的球阀
•末端接头配置包括Triple-Lok和Seal-Lok选件   
•与Parker的SensoControl诊断设备兼容
•适用于液压或气动系统
应用：
•移动设备
•冷却系统
•工业液压系统
•流体或空气系统维护和故障排除
•系统性能优化
•系统验证